LOKLiK iCraft™ Deep Point Blade Set

Deep-point knife set for your LOKLiK iCraft™, consisting of a knife and a knife holder. The deep-point knife is ideal for heavy materials up to 2.0 mm such as leather and thick cardboard.

The iCraft depth blade set includes one blade and a blade holder. With a 60° cutting angle, this blade can be used on heavy materials such as artificial leather, PVC stencil magnetic sheets, EVA foam board, etc. Whether you are cutting intricate details or working with different materials, this blade offers the precision you need.

NB:

• These blades are not compatible with the LOKLiK Crafter cutting machine.
• These iCraft deep-point blades use a different blade holder than the fine-point blades.

This knife can be used to cut the following:

• Faux leather
• Plastic shrink sheets
• PVC template
• EVA foam board
• Magnetic sheets

How do you install a new cutting blade in your LOKLiK iCraft™?

1. Switch off the machine: Make sure the slicer is completely turned off before you begin replacing the blade.
2. Remove the old blade: Carefully open the blade holder by unscrewing it and remove the old blade.
3. Install the new cutting blade: Remove a new deep point blade from the packaging and place it in the blade holder with the sharp side facing down.
4. Secure the blade holder: Screw the blade holder back into place to secure the new blade.
5. Test the blade: Turn the machine on and make a test cut on a scrap piece to verify that the blade is installed properly and operating as expected.

Care and maintenance

Store unused blades in a dry, safe place to prevent rust and damage. Regularly cleaning your blade and holder can extend the life of your blade.